Shade and Drape Controller, 2 outputs for 24 VDC 2-wire bidirectional motors
The C2N-SDC-DC is a 2-channel Shade and Drape Controller designed to provide a convenient and cost-effective solution for controlling 24 Volt DC motorized shades and drapes.
The C2N-SDC-DC is a 2-channel Shade and Drape Controller designed to provide a convenient and cost-effective solution for controlling 24 Volt DC motorized shades and drapes. The C2N-SDC-DC is a Cresnet® device with two independently controlled 24V DC outputs, each designed to provide standard up/down or open/close control of a conventional two-wire bidirectional type motor.
The C2N-SDC-DC mounts in the wall or ceiling using an off-the-shelf 4" square or 2-gang electrical box. Pushbuttons on the front of the unit allow for manual operation of the motors during installation and setup.
| Load Ratings |
| | Motor Control Channels | 2 |
| | Per Channel | 30 Watts (1.25 Amps) @ 24 Volts DC |
| | Total | 30 Watts (1.25 Amps) @ 24 Volts DC |
| | Load Type | 2-Wire 24V DC bidirectional motors, Somfy® LT28B or similar |
| Power Requirements |
| | Cresnet Power Usage | Up to 33 Watts (1.38 Amps @ 24 Volts DC) depending on motor load, dedicated power supply recommended |
| Connections – Front Panel |
| | AB 1 – 2 | (2) 2-pin 3.5mm detachable terminal blocks providing (2) 24V DC 2-wire bidirectional motor control outputs |
| | NET | (1) 4-pin 3.5mm detachable terminal block;
Cresnet slave port, connects to Cresnet control network |
| Buttons |
| | 1 UP/DOWN | (2) buttons for local control of output #1 |
| | 2 UP/DOWN | (2) buttons for local control of output #2 |
| | SETUP | (1) button used for touch-settable ID (TSID) |
| LED Indicators |
| | PWR | (green) Indicates DC power supplied from Cresnet network |
| | NET | (yellow) Indicates communication with the Cresnet system |
| | SETUP | (red) used for touch-settable ID (TSID) |
| Environmental |
| | Temperature | 41° to 122°F (5° to 50°C) |
| | Humidity | 10% to 90% RH (non-condensing) |
| Enclosure |
| | Flat metal plate mountable in a 4-inch square or 2-gang electrical box, 1.5 inch minimum depth |
| Dimensions |
| | Height | 4.10 in (104.2 mm) |
| | Width | 4.10 in (104.2 mm) |
| | Depth | 1.16 in (29.5 mm) |
| Weight |
| | 0.55 lb (0.25 kg) |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.
