HD-MD-4K-200-1G-B KIT [Crestron Electronics, Inc.]

navigation

Missed DM NVX AV-over-IP Week?

The good stuff from our week-long celebration of innovation is available! Catch webinars, techinars, and other opportunities to learn.

Dive in here

View our entire
product catalog

Dedicated solutions for
the modern workplace.

See the Catalog

Online help

Quickly find the answers and resources you need for all things Crestron. Ask questions, manage previously asked questions, access FAQs, and more.

Learn More

Online help

Quickly find the answers and resources you need for all things Crestron. Ask questions, manage previously asked questions, access FAQs, and more.

Learn More

Products / Video / HDMI® Solutions / HDMI Extenders / HD-MD-4K-200-1G-B KIT

Add to Favorites

HD-MD-4K-200-1G-B KIT

4K 2x1 Scaling Auto-Switcher and DM Lite® Wall Plate Extender, Black, over CATx Cable

Discontinued

This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

Provides a cost-effective high-definition AV presentation solution for classrooms and meeting spaces. Consists of a black 1-gang wall plate transmitter (HD-TX-101-C-1G-E Series) and a surface-mountable receiver (HD-RX-4K-210-C-E) that enable AV switching, scaling, and signal extension over a single CATx cable for up to 230 ft (70 m). Provides a single HDMI® input on the transmitter and an additional HDMI input on the receiver. 4K scaling HDMI output ensures a reliable, high-quality video image. Supports 4K60 4:2:0 video.

Have a question?

Add to a Project

Resources

+ Specifications

+ Downloads & documentation

Find a Dealer

Overview
Specifications
Resources
Models & Accessories

The Crestron® HD-MD-4K-200-1G provides a cost-effective multimedia presentation solution for classrooms and meeting spaces. Consisting of a wall plate transmitter (HD-TX-101-C-1G-E Series) and surface-mountable receiver (HD-RX-4K-210-C-E), the HD-MD-4K-200-1G extends an HDMI® signal over a CATx (CAT5e or higher) twisted pair cable. For resolutions up to 2K, the maximum transmission distance is 230 ft (70 m). For higher resolutions up to 4K, the maximum transmission distance is 130 ft (40 m).¹

NOTE: Power is transmitted over the CATx cable that connects the transmitter to the receiver.

The transmitter provides one HDMI input. The receiver provides an additional HDMI input that can be connected to a local AV source or to an optional Crestron media presentation wall plate (MP-WP152, sold separately).

The HD-MD-4K-200-1G is available in two models: HD-MD-4K-200-1G-B and HD-MD-4K-200-1G-W. The HD-MD-4K-200-1G-B includes a black HD-TX-101-C-1G-E Series wall plate transmitter. The HD-MD-4K-200-1G-W includes a white HD‑TX‑101‑C-1G-E Series wall plate transmitter.

Automatic Switching of Inputs
Automatic switching between the HDMI input on the transmitter and the HDMI input on the receiver can occur based on the last connected input or on the routing priority assigned to each input. Switching behavior is configurable using the web interface or programmable using a Crestron control system. In addition to automatic switching, input selection push buttons on the receiver enable the desired input to be selected manually.

HDMI Output with 4K Scaler
A single HDMI output with a built-in scaler connects the receiver to a display or other device with an HDMI input. Input resolutions are automatically scaled to match the native resolution of the display device, resulting in optimal image quality. For applications requiring comprehensive EDID management, the web interface can be used to ensure that every input is displayed at its optimal resolution and format. Input resolutions up to 4K60 4:2:0 are supported.

Audio De-embedding
The analog audio output on the receiver enables the HD-MD-4K-200-1G to extract the stereo audio signal from digital sources to feed a sound bar, amplified speakers, or a separate sound system. The analog audio output is active only when the input is receiving a 2-channel stereo signal.

Device Control
Equipped with onboard control ports, the receiver can control various devices in a room. The COM (RS-232) port and CEC over the HDMI output can enable the display device to be turned on or off automatically without the use of a control system. With the use of a control system, the IR port can also control the display device. Two relay ports are provided for controlling a projection screen and other low-voltage contact closure activated equipment. Two Versiport I/O ports enable the integration of devices such as power sensors and motion detectors. An Ethernet port connection to a LAN also provides control by enabling use of the built-in web interface as well as connection to a control system.

NOTE: The COM, IR, and Ethernet ports cannot be used to extend signals over the CATx cable connection between the receiver and the transmitter.

USB Power Port
A USB power port is included on the transmitter to power USB powered devices (500 mA maximum).

NOTE: No USB data is passed through the USB power port. The port cannot be used to extend USB data, video, or audio signals.

.AV Framework™ Technology Support
In addition to a built-in web interface and control system programming, the built-in .AV Framework technology of the MPC3-201 and MPC3-302 control systems can be used to control the HD-RX-4K-210-C-E as a switcher. (For information about .AV Framework technology, visit www.crestron.com/avframework.)

XiO Cloud® Service Support
The HD-MD-4K-200-1G is compatible with the XiO Cloud service, which is an IoT (Internet of Things) platform for remotely provisioning, monitoring, and managing Crestron devices across an enterprise or an entire client base. Built on the Microsoft® Azure® software platform and using industry-leading Azure IoT Hub technology, the XiO Cloud service enables installers and IT managers to deploy and manage thousands of devices in the amount of time it previously took to manage a single device. Unlike other virtual machine-based cloud solutions, Azure services provide unlimited scalability to suit the ever-growing needs of an enterprise. For more information, visit www.crestron.com/xiocloud.

Native Integration with Cisco Webex® and Touch 10 Devices
Native integration of the Cisco API enables source inputs of the HD-RX-4K-210-C-E to be added to a compatible Cisco Webex video conference system that is controlled by a Cisco Touch 10 control unit. Eliminating the need for control system programming, integration with Cisco® devices is accomplished by using the Crestron Configuration tool, which is hosted on the Crestron website at configuration.crestron.com. Configuration includes the selection of the desired Crestron and Cisco hardware models and the assignment of HD-RX-4K-210-C-E input names and icons for use on the Cisco Touch 10 screen. The resulting configuration file is then downloaded from the website and loaded to the HD-RX-4K-210-C-E using the HD-RX-4K-210-C-E web interface. Communication is established between the HD-RX-4K-210-C-E and Cisco devices, enabling the Cisco Touch 10 to display and control the additional HD-RX-4K-210-C-E inputs.

Key Features

4K60 4:2:0 capability
1-gang wall plate transmitter and surface-mountable receiver with 2x1 AV switching, scaling, and signal extension functionality
One HDMI® input on transmitter and one HDMI input on receiver
One 4K scaling HDMI output on receiver
Automatic switching of inputs
Signal extension of video, audio, and power over a CATx cable—up to 230 ft (70 m) for resolutions up to 2K or up to 130 ft (40 m) for higher resolutions up to 4K
EDID management
HDCP 2.2 management
Stereo audio de-embedding via the analog audio output
IR, RS-232, relay, and I/O control ports
CEC (Consumer Electronics Control) capability
Gigabit Ethernet connectivity
USB power port
Built-in web interface for easy configuration and monitoring
Compatibility with Crestron® 3-Series® or later control systems
.AV Framework™ technology support
XiO Cloud® service support
Native Integration with Cisco Webex® and Touch 10 devices
Low-profile installation
Black wall plate transmitter (decorator style faceplate sold separately)
100-240 VAC power pack included

For the DM Lite CATx cable connection, use Crestron DM-CBL-8G, Crestron DM-CBL-ULTRA, or third-party CAT5e or higher cable. To safeguard against unpredictable environmental electrical noise that may impact performance at resolutions above 1080p, shielded cable and connectors are recommended for all applications and are required when bundling multiple cables in a wire run. Wire and cables are sold separately. DM Lite ports are not compatible with DigitalMedia 8G+®, HDBaseT®, PoE, or PoDM technology or any other type of CATx based interface or network.
The HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HDI-DVI interface cables are available separately.
The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HDI-DVI interface cables are available separately.

This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855‑263‑8754.

This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

The specific patents that cover Crestron products are listed online at patents.crestron.com.

Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

Crestron, the Crestron logo, .AV Framework, 3‑Series, AirMedia, Auto-Locking, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM Lite, QuickSwitch HD, Saros, and XiO Cloud are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Cisco and Cisco Webex are either trademarks or registered trademarks of Cisco Technology, Inc. in the United States and/or other countries. HDBaseT is either a trademark or registered trademark of the HDBaseT Alliance in the United States and/or other countries. HDMI and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Microsoft and Azure are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. UL is either a trademark or registered trademark of Underwriters Laboratories, Inc. in the United States and/or other countries. DisplayPort is either a trademark or registered trademark of Video Electronics Standards Association in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2021 Crestron Electronics, Inc.

Video

Switcher

2x1 (1 input at transmitter plus 1 input at receiver x 1 output at receiver) auto-switching or manual, audio-follows-video, Crestron Auto-Locking® and QuickSwitch HD™ technology

Scaler, HDMI Output

4K video scaler with intelligent frame rate conversion, Deep Color support, content adaptive noise reduction, 3:2/2:2 pull-down

Input Signal Types

HDMI with Deep Color and 4K (DVI and Dual-Mode DisplayPort™ interface compatible²)

Output Signal Types

HDMI with Deep Color and 4K (DVI compatible³)

Copy Protection

HDCP 2.2

Maximum Resolutions

Common resolutions are listed in the following table.

Scan Type	Resolution	Frame Rate	Color Sampling	Color Depth
Progressive	4096x2160 DCI 4K and 3840x2160 4K UHD	24 Hz	4:4:4	30 bit
		30 Hz	4:4:4	24 bit
		30 Hz	4:2:2	36 bit
		60 Hz	4:2:0	24 bit
	2560x1600 WQXGA	60 Hz	4:4:4	36 bit
	1920x1080 HD 1080p	60 Hz	4:4:4	36 bit

NOTES:

Common resolutions are supported at pixel clock rates up to 300 MHz.
Interlaced video sources are not supported.

Scaler Resolutions, HDMI Output

Auto (EDID preferred)
1280x720p@50Hz (720p50)
1280x720p@60Hz (720p60)
1920x1080i@25Hz (1080i25)
1920x1080i@30Hz (1080i30)
1920x1080p@30Hz (1080p30)
1920x1080p@25Hz (1080p25)
1920x1080p@24Hz (1080p24)
1920x1080p@50Hz (1080p50)
1920x1080p@60Hz (1080p60)

3840x2160p@24Hz
3840x2160p@25Hz
3840x2160p@30Hz
4096x2160p@24Hz
4096x2160p@25Hz
4096x2160p@30Hz
3840x2160p@50Hz
3840x2160p@60Hz
4096x2160p@50Hz
4096x2160p@60Hz

Audio

Input Signal Types

HDMI (Dual-Mode DisplayPort interface compatible²)

Output Signal Types

HDMI, analog stereo

Digital Formats

2-channel LPCM

Analog Formats

Stereo 2-channel

Digital-To-Analog Conversion

24-bit 48 kHz

Output Impedance

200 ohms balanced, 100 ohms unbalanced

Maximum Output Level

4 Vrms balanced, 2 Vrms unbalanced

Output Volume

-80 to +20 dB level adjustment range, plus Mute

Mute

Enable or disable independently for HDMI and analog audio output

Analog Output Performance

Frequency Response: 20 Hz to 20 kHz ±0.5 dB;
S/N Ratio: >95 dB @ 10 dBV, 20 Hz to 20 kHz, A-weighted
THD+N: <0.005% @ 1 kHz and 10 dBV
Stereo Separation: 20 Hz to 20 kHz ≤80 dB

Acoustic Noise

Not applicable (fanless)

Communications

Ethernet

100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, CIP, DHCP, web browser setup and control

RS-232

2-way device control and monitoring up to 115.2k baud with hardware and software handshaking

1-way device control via infrared up to 60 kHz

HDMI

HDCP 2.2, EDID, CEC

DM Lite

HDCP 2.2, EDID

Connectors – Transmitter (HD-TX-101-C-1G-E)

HDMI IN

(1) HDMI Type A connectors, female;
HDMI digital video/audio input (DVI and Dual-Mode DisplayPort interface compatible²)

POWER ONLY

(1) USB Type A connector, female;
USB power port (500 mA maximum output);
Supplies power to a USB powered device

TO RX (DM Lite, Rear)

(1) 8-pin RJ-45 connector, female, shielded;
DM Lite® link port for connection to the HD-RX-4K-210-C-E receiver¹

24 VDC 1.25A (Rear)

(1) 2-pin 3.5 mm detachable terminal block;
Not used

NOTE: The power pack included with and connected to the HD-RX-4K-210-C-E receiver can be used to power both the transmitter and receiver. A power pack must not be connected to both devices simultaneously.

Connectors - Receiver (HD-RX-4K-210-C-E)

HDMI INPUT 1

(1) HDMI Type A connector, female;
HDMI digital video/audio input (DVI and Dual-Mode DisplayPort interface compatible²)

DM Lite INPUT 2

(1) 8-pin RJ-45 yellow connector, female, shielded;
DM Lite link port for connection to the HD-TX-101-C-1G-E transmitter¹

HDMI OUTPUT

(1) HDMI Type A connector, female;
HDMI digital video/audio output (DVI compatible³)

NOTE: CEC over the HDMI output provides Power On/Off control of the display device without a control system or full programmable control of any device with a control system.

AUDIO L/R

(1) 5-pin 3.5 mm detachable terminal block;
Balanced/unbalanced stereo line-level audio output;
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced;
Output Impedance: 200 ohms balanced, 100 ohms unbalanced

Ethernet

(1) 8-pin RJ-45 connector, female;
100BASE-TX/1000BASE-T Ethernet port

I/O 1-2

(2) 2-pin detachable terminal blocks;
Comprised of 2 Versiport digital input/output or analog input ports (referenced to GND);
Digital Input: Rated to 0-24 VDC, input impedance 20k ohms, logic threshold >3.125 V low/0 and <1.875 V high/1;
Digital Output: 250 mA sink from maximum 24 VDC, catch diodes for use with real world loads;
Analog Input: Rated for 0-10 VDC, protected to 24 VDC maximum, input impedance 21k ohms with pull-up resistor disabled;
Programmable 5 V, 2k ohms pull-up resistor per pin

RELAY 1-2

(2) 2-pin detachable terminal blocks;
Comprised of 2 normally open, isolated relays;
Rated 1 A, 30 VAC/VDC;
MOV arc suppression across contacts

(1) 2-pin 3.5 mm detachable terminal block;
IR output control port;
Supports IR up to 60 kHz;
IRP2 emitter sold separately

NOTE: The IR port provides Power On/Off control of the display device with the use of a control system.

COM

(1) 5-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port;
Supports RS-232 up to 115.2k baud with hardware and software handshaking

NOTE: The COM port provides Power On/Off control of the display device without a control system or full programmable control of any device with a control system.

24V 1.25A

(1) 2.1 x 5.5 mm DC power connector;
24 VDC power input;
PW-2412WU power pack included

NOTE: The power pack powers both the HD-RX-4K-210-C-E receiver and the HD-TX-101-C-1G-E transmitter. A power pack must not be connected to both devices simultaneously.

SERVICE

(1) USB Type A connector, female;
For factory use only

Transmitter (HD-TX-101-C-1G-E)

PWR

(1) Green LED, indicates that power is being applied to the HD-TX-101-C-1G-E from the power pack connected to the HD-RX-4K-210-C-E receiver

HDMI IN

(1) Green LED, indicates HDMI input signal presence

TO RX

(2) LEDs on RJ-45 connector. Green LED indicates DM Lite link status. Amber LED indicates a valid video signal.

Controls and Indicators - Receiver (HD-RX-4K-210-C-E)

PWR

(1) LED, indicates that power is being applied to the HD-RX-4K-210-C-E from the power pack connected to the receiver. Amber indicates that the HD-RX-4K-210-C-E is booting. Green indicates that the HD-RX-4K-210-C-E is operational.

INPUT 1 – 2

(2) Push buttons for manual input selection and (2) LEDs. Green indicates that video is switched. Amber indicates that video is detected but is not switched.

AUTO

(1) Push button to enable or disable automatic switching and (1) green LED to indicate that automatic switching is enabled

SETUP

(1) Red LED and (1) push button for display of IP address on the HDMI output

DM Lite

(2) LEDs on RJ-45 connector. Green indicates that a DM Lite link is established. Flashing amber indicates non-HDCP video, and solid
amber indicates HDCP video.

Ethernet

(2) LEDs on RJ-45 connector. Green indicates that an Ethernet link is established. Flashing amber indicates Ethernet activity.

Power

Power Pack
(Included with Receiver)

Input: 100-240 VAC, 50/60 Hz
Output: 1.25 A @ 24 VDC
Model: PW-2412WU

NOTE: The power pack connects to the HD-RX-4K-210-C-E receiver and powers both the receiver and the transmitter. A power pack must not be connected to both devices simultaneously.

Power Consumption

14.8 W typical

Environmental

Temperature

32° to 104° F (0° to 40° C)

Humidity

Transmitter: 20% to 90% RH (non-condensing);
Receiver: 10% to 90% RH (non-condensing)

Heat Dissipation

50.5 BTU/hr

Construction - Transmitter (HD-TX-101-C-1G-E)

Composition

Metal housing and bracket with black polycarbonate front label overlay

Mounting

Mounts in a 1-gang 2-1/4 in. (57 mm) deep U.S. electrical box or plaster ring (not included)

Faceplate

Requires a decorator style faceplate (Crestron FP-G1 series or larger, sold separately)

Enclosure - HD-RX-4K-210-C-E

Chassis

Metal, black finish, vented sides, 2 mounting flanges attached

Mounting

Surface or rack rail mount

Dimensions - Transmitter (HD-TX-101-C-1G-E)

Height

4.08 in. (104 mm)

Width

1.81 in. (46 mm)

Depth

1.97 in. (50 mm)

Dimensions - Receiver (HD-RX-4K-210-C-E)

Height

5.11 in. (130 mm)

Width

10.53 in. (268 mm) with mounting flanges attached

Depth

1.10 in. (28 mm)

Weight

Transmitter

5.30 oz (150 g)

Receiver

2.3 lb (1.05 kg)

Compliance

UL® Listed for US and Canada, CE, IC, FCC Part 15 Class B digital device

Click here to search product certificates.

For the DM Lite CATx cable connection, use Crestron DM-CBL-8G, Crestron DM-CBL-ULTRA, or third-party CAT5e or higher cable. To safeguard against unpredictable environmental electrical noise that may impact performance at resolutions above 1080p, shielded cable and connectors are recommended for all applications and are required when bundling multiple cables in a wire run. Wire and cables are sold separately. DM Lite ports are not compatible with DigitalMedia 8G+®, HDBaseT®, PoE, or PoDM technology or any other type of CATx based interface or network.
The HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HDI-DVI interface cables are available separately.
The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HDI-DVI interface cables are available separately.

Pricing Region Select

Please select your region below to see the appropriate Advertised Pricing.

GREAT TEAMS OWN THE MOMENT

Explore moments made possible with DM NVX® technology.

Explore moments made possible with DM NVX® technology.

Explore moments made possible with DM NVX® technology.

GREAT TEAMS OWN THE MOMENT

Explore moments made possible with DM NVX® technology.

GREAT TEAMS OWN THE MOMENT

GREAT TEAMS OWN THE MOMENT

Missed DM NVX AV-over-IP Week?

View our entire
product catalog

Online help

Online help

Key Features

GREAT TEAMS OWN THE MOMENT

Explore moments made possible with DM NVX® technology.

Explore moments made possible with DM NVX® technology.

Explore moments made possible with DM NVX® technology.

GREAT TEAMS OWN THE MOMENT

Explore moments made possible with DM NVX® technology.

GREAT TEAMS OWN THE MOMENT

GREAT TEAMS OWN THE MOMENT

Missed DM NVX AV-over-IP Week?

View our entire product catalog

Online help

Online help

Key Features

View our entire
product catalog