0-10V 8-Channel Dimmer Module, 2 Feeds, 230V
The CLXI-2DIMFLV8 provides 8 channels of 0-10 Volt dimming control for fluorescent ballasts and LED drivers.
Module shown with CLTI-Series Terminal block on left.
As part of a complete Crestron® lighting system, the CLXI-2DIMFLV8 lighting control module provides 8 channels of 0-10 Volt dimming control for fluorescent ballasts and LED drivers. The CLXI-2DIMFLV8 is actually composed of two independent 4-channel dimmers in a single module. Each channel is rated for 20 Amps, with a total module rating of 40 Amps when fed from two separate 20 Amp feeds. Air-gap relays are provided on every channel output, allowing individual circuits to be serviced without disabling the entire module.
CLXI Series dimmers are rigorously built for ultimate reliability. Split-bobbin transformers and ground referenced electronics deliver superior performance. Lamp flicker is minimized through Crestron's innovative zero-crossing detection technique backed by proprietary firmware. Low-maintenance convection cooling assures quiet and trouble-free operation.
An override feature allows each channel to be adjusted to a preset state during setup. In the event that Cresnet® communications should be disrupted for any reason, a simple contact closure can be used to activate the override presets on a global or semi-global basis.
The CLXI-2DIMFLV8 occupies a single module space in any CAEN or CAENIB automation enclosure. Termination of high-voltage wiring to the module is facilitated by a CLTI-2DIMFLV8 terminal block, sold separately to enable termination of the wiring any time prior to installing the module. CLXI modules are controlled by the CLX-DIN-AP3 or other 3-Series® control system via the Cresnet network. A 5-wire link provides bussing of the Cresnet and override signals between modules within an enclosure (interconnect jumpers included).
Key Features
- 8 channels of 0-10 Volt dimming control for fluorescent ballasts and LED drivers
- Two independent 4-channel dimmers in a single module
- Dual or single 230 Volt feed
- Arcless switching
- Air-gap relays on every channel output
- Override preset capability
- Convection cooled
- Occupies 1 module space in a CAEN or CAENIB automation enclosure
- Easy termination using CLTI Series terminal block
- CEC Title 24 2013 Compliant
Load Ratings |
|
Dimmer Channels |
8 |
|
Per Channel |
20 Amps |
|
Per Group |
Channels 1-4: 20 Amps;
Channels 5-8: 20 Amps |
|
Module Total |
40 Amps |
|
Load Types |
0-10 Volt fluorescent ballast or LED driver (4-wire) |
Power Requirements |
|
220-240 Volts AC, 50/60Hz, line power |
Connectors on Module |
|
Module Interconnect |
(2) 5-pin 0.156 inch headers;
Cresnet/Override interconnect ports;
Each connects to a CAEN-BLOCK or the adjacent CLXI-Series module using the interconnect cable provided |
Connections via CLTI Terminal Block (sold separately) |
|
LINE 1 – 2 |
(2) DIN rail terminal blocks, brown, line power inputs |
|
DIM 1 – 8 |
(8) DIN rail terminal blocks, red, channel outputs |
|
N IN 1 – 2 |
(2) DIN rail terminal blocks, blue, line input neutrals |
|
N OUT 1 – 8 |
(8) DIN rail terminal blocks, blue, channel output neutrals |
Buttons |
|
SETUP |
(1) Pushbutton, for manual channel activation and TSID |
Indicators |
|
PWR |
(1) Green LED, indicates line power is applied to the LINE 1 terminal |
|
NET |
(1) Yellow LED, indicates communication with the control system |
|
1 – 8 |
(8) Red LEDs, each indicates the state of the corresponding channel |
|
SETUP |
(1) Red LED, indicates unit is in setup/manual mode |
Environmental |
|
Temperature |
32° to 104° F (0° to 40° C) |
|
Humidity |
10% to 90% RH (non-condensing) |
|
Heat Dissipation |
45 BTU/hr |
Enclosure |
|
Gray metal, surface mount module with (2) integral mounting flanges;
Occupies 1 module space in any CAEN or CAENIB enclosure |
Dimensions |
|
Height |
6.92 in (176 mm) |
|
Width |
6.70 in (153 mm) |
|
Depth |
3.32 in (84 mm) |
Weight |
|
3.15 lbs (1.43 kg) |
Standards & Certifications |
|
UL Listed, CEC Title 24 2013 Compliant |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.