8 Channel Dimmer Module, Single Feed
This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.
For a substitute, see CLX-2DIMU8.
As part of a complete Crestron® lighting system, the CLX-1DIM8 lighting control module provides 8 channels of dimming for incandescent, magnetic low-voltage, neon/cold cathode, and dimmable 2-wire fluorescent loads. Each channel is rated for 1920 Watts, with a total module rating of 1920 Watts. Air-gap relays are provided on every channel output allowing individual circuits to be serviced without disabling the entire module.
Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.
As part of a complete Crestron® lighting system, the CLX-1DIM8 lighting control module provides 8 channels of dimming for incandescent, magnetic low-voltage, neon/cold cathode, and dimmable 2-wire fluorescent loads. Each channel is rated for 1920 Watts, with a total module rating of 1920 Watts. Air-gap relays are provided on every channel output allowing individual circuits to be serviced without disabling the entire module.
CLX-Series dimmers are rigorously built using 40 Amp triacs and oversized heat sinks for ultimate reliability. Split-bobbin transformers and ground referenced electronics deliver superior performance. Lamp flicker is minimized through Crestron's innovative zero-crossing detection technique backed by proprietary firmware. Low-maintenance convection cooling assures quiet and trouble-free operation.
An override feature allows each channel to be adjusted to a preset state during setup. In the event that Cresnet® communications should be disrupted for any reason, a simple contact closure can be used to activate the override presets on a global or semi-global basis.
The CLX-1DIM8 occupies a single module space in any CAEN or CAEN-MLO automation enclosure. Termination of high-voltage wiring to the module is facilitated by a CLT-1DIM8 terminal block, sold separately to enable termination of the wiring any time prior to installing the module. CLX modules are controlled by the DIN-AP3 and other 3-Series® control systems via the Cresnet network. A 5-wire link provides bussing of the Cresnet and override signals between modules within an enclosure (interconnect jumpers included).
Key Features
- 8 channels of dimming for incandescent, magnetic low-voltage, neon/cold cathode, and dimmable 2-wire fluorescent loads
- Two independent 4 channel dimmers in a single module
- Dual or single 120 Volt feed
- Air-gap relays on every channel output
- Override preset capability
- Convection cooled
- Occupies 1 module space in a CAEN or CAEN-MLO automation enclosure
- Easy termination using CLT-Series terminal block
- CEC Title 24 2013 Compliant
Load Ratings |
| Dimmer Channels | 8 |
| Per Channel | 16 Amps (1920 Watts) |
| Module Total | 16 Amps (1920 Watts) |
| Minimum Load | 25 Watts |
| Load Types | Incandescent, Magnetic Low-voltage, Neon/Cold Cathode, Dimmable 2-Wire Fluorescent |
Power Requirements |
| 120 Volts AC, 50/60Hz, single-phase |
Connectors on Module |
| Module Interconnect | (2) 5-pin 0.156 inch headers; Cresnet®/Override interconnect ports; Connect to DIN-AP3, CAEN-BLOCK, or adjacent CLX-Series module using interconnect cable provided |
Connections via CLT Terminal Block (sold separately) |
| LINE | (1) DIN rail terminal block, black, line power input |
| DIM 1 - 8 | (8) DIN rail terminal blocks, red, channel outputs |
| N IN | (1) DIN rail terminal block, white, line input neutral |
| N OUT 1 - 8 | (8) DIN rail terminal blocks, white, channel output neutrals |
Buttons |
| SETUP | Used for manual channel activation and TSID |
LED Indicators |
| PWR | (green) Indicates line power is applied to the LINE terminal |
| NET | (yellow) Indicates communication with the control system |
| 1 – 8 | (red x8) Indicates state of each channel |
| SETUP | (red) Indicates unit is in setup/manual mode |
Environmental |
| Temperature | 32° to 104°F (0° to 40°C) |
| Humidity | 10% to 90% RH (non-condensing) |
| Heat Dissipation | 26 BTU/Hr + (4.7 BTU/Hr x Load Current in Amps), 101 BTU/Hr at maximum load |
Enclosure |
| Gray metal with black heat sink, surface mount module with (2) integral mounting flanges; Occupies 1 module space in any CAEN or CAEN-MLO enclosure |
Dimensions |
| Height | 7.59 in (19.27 cm) |
| Width | 6.92 in (17.57 cm) |
| Depth | 3.43 in (8.70 cm) |
Weight |
| 5.00 lb (2.27 kg) |
Standards & Certifications |
| UL Listed, CEC Title 24 2013 Compliant |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.