This page is only available in English

Produits

    Pages

        Take a look at #CrestronNow: Update on Lead Times - Learn More

        HD-RX-4K-410-C-E-SW4

        DMPS Lite™ 4K Multiformat 4x1 AV Switch and Receiver with 4-Port Ethernet Switch

        Discontinued

        Compatible with DM Lite® transmitters (certain models only). Features two DM Lite inputs, two HDMI® inputs, and one scaling HDMI output. Includes amplified audio outputs for speakers, five analog audio inputs, and two analog audio outputs. Also includes IR, RS-232, relay, and I/O control ports. Provides a 4-port Gigabit Ethernet switch with two PoE+ ports. Supports .AV Framework™ technology.

        The Crestron HD‑RX-4K-410-C-E-SW4 multiformat AV switch and receiver provides enhanced HDMI® video switching and audio presentation capabilities in areas such as conference rooms and classrooms. The HD‑RX-4K-410-C-E-SW4 provides two DM Lite® inputs for connection to up to two DM Lite 4K60 4:2:0 transmitters. For a list of supported DM Lite transmitters, refer to Online Help Answer ID 1001796.

        A CATx (CAT5e or higher) twisted pair cable connects a DM Lite transmitter to the HD‑RX-4K-410-C-E-SW4 for the transmission of HDMI signals. For resolutions up to 2K, the maximum transmission distance is 230 ft (70 m). For higher resolutions up to 4K, the maximum transmission distance is 130 ft (40 m).1

        NOTE: Power is transmitted over the CATx cable that connects the HD‑RX-4K-410-C-E-SW4 to a DM Lite transmitter. The HD‑RX-4K-410-C-E-SW4 can power two transmitters simultaneously.

        In addition to two DM Lite inputs, the HD‑RX-4K-410-C-E-SW4 provides two HDMI inputs that can be connected to local AV sources.

        Automatic Switching of Inputs
        Automatic switching among the DM Lite and HDMI inputs can occur based on the last connected input. Switching behavior is configurable using the web interface or programmable using a Crestron control system. In addition, input selection push buttons on the front panel of the HD‑RX-4K-410-C-E-SW4 allow the desired input to be selected manually.

        HDMI Output with 4K Scaler
        A single HDMI output with a built-in scaler connects to a display or other device with an HDMI input.2 Input resolutions are automatically scaled to match the native resolution of the display device, resulting in optimal image quality. For applications requiring comprehensive EDID management, the web interface can be used to ensure that every input is displayed at its optimal resolution and format. Input resolutions up to 4K60 4:2:0 are supported.

        4-Port Gigabit Ethernet Switch with Two PoE+ Ports
        The HD-RX-4K-410-C-E-SW4 includes a 4-port Gigabit Ethernet switch to provide a convenient LAN connection for local network devices. Two of the ports (Port 3 and 4) are PoE+ power sourcing equipment (PSE) ports that can be connected to two PoE+ powered devices (PD) simultaneously.

        NOTE: The Ethernet switch functions as a simple unmanaged switch that does not support configuration and administrative settings. The Ethernet ports on the HD-RX-4K-410-C-E-SW4 are not recommended for streaming video content using Crestron DM NVX™ or third-party AV-over-IP products.

        Enhanced Audio Capabilities
        The HD‑RX-4K-410-C-E-SW4 includes a built-in amplifier that can drive a pair of 4- or 8-ohm stereo speakers (25 W per channel). The HD‑RX-4K-410-C-E-SW4 also provides 6x2 audio mixing capability. Embedded HDMI 2-channel LPCM audio can be extracted from the selected DM Lite or HDMI input and combined with the five analog audio inputs (LINE 1, LINE 2, MIC 1, MIC 2, and AUX). Gain and mute sound adjustments can be made to each of the six inputs being mixed. The mixed audio is then transmitted as two audio outputs: one mirrored AUX 1, SPEAKER, HDMI mixer output and one AUX 2 output. Audio mixer settings such as volume and mute control are configurable for each of the two outputs independently.

        Device Control
        Equipped with onboard control ports, the HD‑RX-4K-410-C-E-SW4 can control various devices in a room. The COM (RS-232) port and CEC over the HDMI output can enable the display device to be turned on or off automatically without the use of a control system. With the use of a control system, the IR port can also control the display device. Two relay ports are provided for controlling a projection screen and other low-voltage contact-closure activated equipment. Two Versiport I/O ports enable the integration of devices such as power sensors and motion detectors. An Ethernet port connection to a LAN also provides control by enabling use of the built-in web interface as well as connection to a control system.

        NOTE: The IR, COM, and Ethernet ports cannot be used to extend signals over a DM Lite connection.

        .AV Framework™ Technology Support
        In addition to a built-in web interface and control system programming, the built-in .AV Framework technology of the MPC3-201 and MPC3-302 control systems can be used to control the HD‑RX-4K-410-C-E-SW4 as a switcher. (For information about .AV Framework technology, visit www.crestron.com/avframework.)

        Crestron XiO Cloud® Service Support
        The HD‑RX-4K-410-C-E-SW4 is compatible with the Crestron XiO Cloud service, which is an IoT (Internet of Things) based platform for remotely provisioning, monitoring, and managing Crestron devices across an enterprise or an entire client base. The service enables installers and IT managers to deploy and manage thousands of devices in the amount of time it would ordinarily take to manage a single device. For more information, visit www.crestron.com/xiocloud.

        Native Integration with Cisco Webex® and Touch 10 Devices
        Native integration of the Cisco API enables source inputs of the HD-RX-4K-410-C-E-SW4 to be added to a compatible Cisco Webex video conference system that is controlled by a Cisco Touch 10 control unit. Eliminating the need for control system programming, integration with Cisco® devices is accomplished by using the Crestron Configuration tool, which is hosted on the Crestron website at configuration.crestron.com. Configuration includes the selection of the desired Crestron and Cisco hardware models and the assignment of HD-RX-4K-410-C-E-SW4 input names and icons for use on the Cisco Touch 10 screen. The resulting configuration file is then downloaded from the website and loaded to the HD-RX-4K-410-C-E-SW4 using the HD-RX-4K-410-C-E-SW4 web interface. Communication is established between the HD-RX-4K-410-C-E-SW4 and Cisco devices, enabling the Cisco Touch 10 to display and control the additional HD-RX-4K-410-C-E-SW4 inputs.

        Compact Design
        Compact in design, the HD‑RX-4K-410-C-E-SW4 can be mounted onto a flat surface such as a wall or attached to the underside of a table.  

         
        Key Features
        • 4K/60 4:2:0 capability
        • Two DM Lite® ports for interoperability with up to two DM Lite transmitters (certain models only)
        • Two HDMI® inputs
        • One HDMI output with 4K scaler
        •  4-port Gigabit Ethernet switch with two PoE+ ports
        • Two stereo line level inputs, two mono microphone inputs, and one mono auxiliary audio input
        • Built-in amplifier with 25 W per channel for 4- or 8-ohm stereo speakers
        • Two stereo auxiliary outputs
        • IR, RS-232, relay, and I/O control ports
        • CEC (Consumer Electronics Control) capability
        • Automatic switching of inputs
        • 6x2 audio mixing capability
        • EDID management
        • HDCP management including HDCP 2.2 support
        • Built-in web interface for easy configuration and monitoring
        • Compatibility with Crestron® 3-Series® or later control systems
        • .AV Framework™ technology support
        • Crestron XiO Cloud® service support
        • Native integration with Cisco Webex® and Touch 10 devices
        • Compact surface-mount design
        1. For DM Lite connections, use Crestron DM-CBL-8G, Crestron DM-CBL-ULTRA, or third-party CAT5e or higher cable. To safeguard against unpredictable environmental electrical noise that may impact performance at resolutions above 1080p, shielded cable and connectors are recommended for all applications and are required when bundling multiple cables in a wire run. Wire and cables sold separately. DM Lite ports are not compatible with DigitalMedia 8G+®, HDBaseT®, PoE, or PoDM technology or any other type of CATx based interface or network.
        2. For information about compatibility of the HDMI output with Crestron HDMI extenders, refer to Online Help Answer ID 1000503 on the Crestron website (www.crestron.com).
        3. The HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HDI-DVI interface cables are available separately.
        4. The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HDI-DVI interface cables are available separately.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at

        www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855‑263‑8754.

        The specific patents that cover Crestron products are listed online at www.crestron.com/legal/patents.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.

        Crestron, the Crestron logo, .AV Framework, 3‑Series, AirMedia,  Auto-Locking, XiO Cloud, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM Lite, DM NVX, QuickSwitch HD, and Saros are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Cisco and Cisco Webex are either trademarks or registered trademarks of Cisco Technology, Inc. in the United States and/or other countries. DisplayPort is either a trademark or registered trademark of Video Standards Association in the United States and/or other countries. HDBaseT is either a trademark or registered trademark of the HDBaseT Alliance in the United States and/or other countries. HDMI and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. UL is either a trademark or registered trademark of Underwriters Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2022 Crestron Electronics, Inc.

         
        Video
        Switcher 4x1 auto-switching or manual, audio-follows-video, Crestron Auto-Locking® and QuickSwitch HD™ technologies
        Scaler (HDMI Output) 4K video scaler with motion-adaptive deinterlacing, intelligent frame rate conversion, Deep Color support, content-adaptive noise reduction, 3:2/2:2 pull-down detection and recovery
        Input Signal Types HDMI with Deep Color and 4K (DVI and Dual-Mode DisplayPort™ interface compatible3) on Inputs 1-2, DM Lite with Deep Color and 4K on Inputs 3-4
        Output Signal Types HDMI with Deep Color and 4K (DVI compatible4)
        Copy Protection HDCP 2.2
        Maximum Resolutions Common resolutions are listed below for the HDMI and DM Lite inputs.
        Scan
        Type
        Resolution Frame
        Rate
        Color
        Sampling
        Color
        Depth
        Progressive 4096x2160 DCI 4K and 3840x2160 4K UHD 24 Hz 4:4:4 30 bit
        30 Hz 4:4:4 24 bit
        30 Hz 4:2:2 36 bit
        60 Hz 4:2:0 24 bit
        2560x1600 WQXGA 60 Hz 4:4:4 36 bit
        1920x1080 HD 1080p 60 Hz 4:4:4 36 bit
        NOTES:
        • Custom resolutions are supported at pixel clock rates up to 300 MHz.
        • Interlaced video sources are not supported.
        Scaler Output Resolutions, HDMI
        Auto (EDID preferred), 1280x720p@50Hz (720p50), 1280x720p@60Hz (720p60), 1920x1080i@25Hz (1080i25), 1920x1080i@30Hz (1080i30), 1920x1080p@30Hz (1080p30), 1920x1080p@25Hz (1080p25), 1920x1080p@24Hz (1080p24), 1920x1080p@50Hz (1080p50), 1920x1080p@60Hz (1080p60), 3840x2160p@24Hz, 3840x2160p@25Hz, 3840x2160p@30Hz, 4096x2160p@24Hz, 4096x2160p@25Hz, 4096x2160p@30Hz, 3840x2160p@50Hz, 3840x2160p@60Hz, 4096x2160p@50Hz, 4096x2160p@60Hz  
        Audio, General
        Switcher/Mixer 6x2 audio mixer
        Audio Inputs Two stereo 2-channel LINE inputs
        Two mono 1-channel MIC inputs
        One mono 1-channel AUX input
        One stereo 2-channel LPCM audio extracted from the selected HDMI or DM Lite input source
        Audio Outputs One mirrored AUX 1, SPEAKER, and HDMI mixer output, stereo 2-channel
        One AUX 2 output, stereo 2-channel
        Analog-to-Digital Conversion 24-bit 48 kHz
        Digital-to-Analog Conversion 24-bit 48 kHz
        Frequency Response, Analog Audio Outputs 20 Hz to 20 kHz ±0.5 dB (AUX outputs)
        20 Hz to 20 kHz @ full power ±3 dB (speaker output)
        S/N Ratio, Analog Audio Outputs >95 dB @ 10 dBV, 20 Hz to 20 kHz, A-weighted (AUX outputs)
        >90 dB @ 10 dBV, 20 Hz to 20 kHz, A-weighted (speaker output)
        THD+N, Analog Audio Outputs <0.005% @ 1 kHz and 10 dBV (AUX outputs)
        <0.3% @ 1 kHz and 10 dBV (speaker output)
        Stereo Separation, Analog Audio Outputs 20 Hz to 20 kHz ≤80 dB (AUX outputs)
        20 Hz to 20 kHz ≤60 dB (speaker output)
        Audio, Microphone Inputs
        Two balanced 1-channel microphone inputs (MIC 1 and MIC 2)
        Input Signal Type Mono analog
        Phantom Power +48 VDC, 12 mA, enable or disable per channel
        Gain 0 dB to +60 dB per channel in 1 dB increments
        Mute Enable or disable per channel
        Audio, Line Inputs
        Two balanced/unbalanced 2-channel line inputs (LINE 1 and LINE 2)
        Input Signal Type Stereo analog
        Balanced Line Input Level 4 Vrms
        Unbalanced Line Input Level 2 Vrms
        Line Input Impedance >10k ohms
        Audio, Auxiliary Input
        One balanced 1-channel auxiliary input (AUX):
        Input Signal Type Mono analog
        Balanced Line Input Level 4 Vrms
        Line Input Impedance >10k ohms
        Audio, Source Inputs
        Two HDMI and three DM Lite inputs (HDMI 1-2 and DM Lite 3-4):
        Input Signal Types HDMI (Dual-Mode DisplayPort interface compatible), DM Lite
        Digital Formats 2-channel LPCM
        Audio Outputs
        One mirrored SPEAKER, HDMI, and balanced/unbalanced AUX 1 mixer output:
        Output Signal Type/Format Stereo 2-channel
        AUX 1 Output Impedance 200 ohms balanced, 100 ohms unbalanced
        AUX 1 Maximum Output Level 4 Vrms balanced, 2 Vrms unbalanced
        Selected Source -80 dB to +20 dB level adjustment range plus Mute
        MIC 1-2 -80 dB to +20 dB level adjustment range plus Mute
        LINE 1-2 -80 dB to +20 dB level adjustment range plus Mute
        AUX -80 dB to +20 dB level adjustment range plus Mute
        Master Volume -80 dB to +20 dB level adjustment range plus Mono
        Amplifier Output Power 25 W RMS per channel @ 8 ohms, 4 ohms tolerant
        Amplifier Power On or off
        Mute Enable or disable independently for AUX 1, SPEAKER, and HDMI mixer output
        One balanced/unbalanced AUX 2 output:
        Output Signal Type/Format Stereo 2-channel
        Output Impedance 200 ohms balanced, 100 ohms unbalanced
        Maximum Output Level 4 Vrms balanced, 2 Vrms unbalanced
        Selected Source -80 dB to +20 dB level adjustment range plus Mute
        MIC 1-2 -80 dB to +20 dB level adjustment range plus Mute
        LINE 1-2 -80 dB to +20 dB level adjustment range plus Mute
        AUX -80 dB to +20 dB level adjustment range plus Mute
        Master Volume -80 dB to +20 dB level adjustment range plus Mono
        Mute Enable or disable for AUX 2
        Communications
        Ethernet 100/1000 Mbps, auto-switching, auto-negotiating,
        auto-discovery, full/half duplex, CIP, DHCP, web browser setup
        and control
        RS-232 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking
        IR 1-way device control via infrared up to 60 kHz
        HDMI HDCP 2.2, EDID, CEC
        DM Lite HDCP 2.2, EDID
        Connectors
        L/R, LINE INPUT 1-2 (2) 5-pin 3.5 mm detachable terminal blocks
        MIC INPUT 1-2 (2) 3-pin 3.5 mm detachable terminal blocks
        AUX INPUT (1) 3-pin 3.5 mm detachable terminal block
        HDMI INPUT 1 – 2 (2) HDMI Type A connectors, female;
        HDMI digital video/audio inputs;
        DVI and Dual-Mode DisplayPort interface compatible3
        DM Lite INPUT 3-4 (3) 8-pin RJ-45 yellow connectors, female, shielded;
        DM Lite input ports for connection to DM Lite transmitters
        L/R, AUX OUT 1-2 (2) 5-pin 3.5 mm detachable terminal blocks
        HDMI OUTPUT (1) HDMI Type A connector, female;
        HDMI digital video/audio output;2
        DVI compatible4
        NOTE: CEC over the HDMI output provides Power On/Off control of the display device without a control system or full programmable control of any device with a control system.
        Ethernet 1-4 (4) 8-pin RJ-45 connector, female;
        100BASE-TX/1000BASE-T Ethernet ports;
        Ports 3-4: PoE+ Power Sourcing Equipment (PSE) outputs,
        IEEE 802.3at Type 2 PoE+ Class 4 (25.5 W) compliant
        SPEAKER OUTPUT (2) 2-pin 7.62 mm reversed gender 20 A detachable terminal blocks, power amplifier outputs;
        Wire Size: Terminals accept up to 12 AWG (3.31 mm);
        Output is direct-coupled—not transformer isolated
        I/O 1-2 (2) 2-pin detachable terminal blocks;
        Comprises 2 Versiport digital input/output or analog input ports (referenced to GND);
        Digital Input: Rated to 0-24 VDC, input impedance 20k ohms, logic threshold >3.125 V low/0 and <1.875 V high/1;
        Digital Output: 250 mA sink from maximum 24 VDC, catch diodes for use with real world loads;
        Analog Input: Rated for 0-10 VDC, protected to 24 VDC maximum, input impedance 21k ohms with pull-up resistor disabled;
        Programmable 5 V, 2k ohms pull-up resistor per pin
        RLY 1-2 (2) 2-pin detachable terminal blocks;
        Comprise 8 normally open, isolated relays;
        Rated 1 A, 30 VAC/VDC;
        MOV arc suppression across contacts
        IR (1) 2-pin 3.5 mm detachable terminal block;
        IR output control port; supports IR up to 60 kHz;
        IRP2 emitter sold separately
        NOTE: The IR port provides Power On/Off control of the display device with the use of a control system.
        COM (1) 5-pin 3.5 mm detachable terminal block;
        Bidirectional RS-232 port;
        Supports RS-232 up to 115.2k baud with hardware and software
        handshaking
        NOTE: The COM port provides Power On/Off control of the display device without a control system or full programmable control of any device with a control system.
        100-240V 4A-2A 50/60 Hz (1) IEC 60320 C14 mains power inlet:
        Mates with removable power cord, included
        NOTE: This power connection powers both the HD-RX-4K-410-C-E-SW4 and all connected DM Lite transmitters. When connected to the HD-RX-4K-410-C-E-SW4, DM Lite transmitters must not be connected to power.
        SERVICE (1) USB Type A connector, female;
        For factory use only
        Controls and Indicators
        PWR (1) LED, indicates that power is being applied to the HD-RX-4K-410-C-E-SW4. Amber indicates that the device is booting. Green indicates that the device is operational.
        INPUT 1-4 (4) Push buttons for manual input selection and (4) LEDs. Green indicates that video is switched. Amber indicates that video is detected but is not switched.
        AUTO (1) Push button to enable or disable automatic switching, and (1) green LED to indicate that automatic switching is enabled
        SETUP (1) Red LED and (1) push button for display of IP address on the HDMI output
        DM Lite (2) LEDs on RJ-45 connector. Green indicates that a DM Lite link is established. Flashing amber indicates non-HDCP video and solid amber indicates HDCP video.
        Ethernet (2) LEDs on RJ-45 connector. Green indicates that an Ethernet link is established. Flashing amber indicates Ethernet activity.
        Power
        Mains Power 4 A - 2 A @ 100-240 VAC, 50/60 Hz
        NOTE: The AC mains power connection powers both the HD-RX-4K-410-C-E-SW4 and all connected DM Lite transmitters. When connected to the HD-RX-4K-410-C-E-SW4, DM Lite transmitters must not be connected to power.
        Environmental
        Temperature 32° to 104° F (0° to 40° C)
        Humidity 10% to 90% RH (non-condensing)
        Enclosure
        Chassis Metal, black finish, vented sides, 2 mounting flanges attached
        Mounting Surface mount
        Dimensions
        Height 10.22 in (260 mm)
        Width 14.18 in (361 mm) with mounting flanges attached
        Depth 1.74 in (45 mm)
        Compliance
        UL® Listed for US and Canada, CE, IC, FCC Part 15 Class B digital device
        Click here to search product certificates.
        1. For DM Lite connections, use Crestron DM-CBL-8G, Crestron DM-CBL-ULTRA, or third-party CAT5e or higher cable. To safeguard against unpredictable environmental electrical noise that may impact performance at resolutions above 1080p, shielded cable and connectors are recommended for all applications and are required when bundling multiple cables in a wire run. Wire and cables sold separately. DM Lite ports are not compatible with DigitalMedia 8G+®, HDBaseT®, PoE, or PoDM technology or any other type of CATx based interface or network.
        2. For information about compatibility of the HDMI output with Crestron HDMI extenders, refer to Online Help Answer ID 1000503 on the Crestron website (www.crestron.com).
        3. The HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HDI-DVI interface cables are available separately.
        4. The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HDI-DVI interface cables are available separately.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at

        www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855‑263‑8754.

        The specific patents that cover Crestron products are listed online at www.crestron.com/legal/patents.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.

        Crestron, the Crestron logo, .AV Framework, 3‑Series, AirMedia,  Auto-Locking, XiO Cloud, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM Lite, DM NVX, QuickSwitch HD, and Saros are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Cisco and Cisco Webex are either trademarks or registered trademarks of Cisco Technology, Inc. in the United States and/or other countries. DisplayPort is either a trademark or registered trademark of Video Standards Association in the United States and/or other countries. HDBaseT is either a trademark or registered trademark of the HDBaseT Alliance in the United States and/or other countries. HDMI and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. UL is either a trademark or registered trademark of Underwriters Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2022 Crestron Electronics, Inc.

        Pricing Region Select
        Please select your region below to see the appropriate Advertised Pricing.
        Powered by Translations.com GlobalLink OneLink SoftwarePowered By OneLink