This page is only available in English

Produits

    Pages

        HZ-SWEX-B

        Horizon™ In-Wall Switch with infiNET EX® Wireless Communication, 120 VAC, Black

        The HZ‑SWEX is a Horizon™ in‑wall switch that controls incandescent, magnetic low voltage, and tungsten‑halogen loads as well as electronic ballasts and 1/2 HP motors. Its design matches the entire line of Horizon dimmers, switches, and keypads, making it a great addition to new or retrofit installations. 

        Faceplate Sold Separately

        The HZ‑SWEX is a Horizon™ in‑wall switch that controls incandescent, magnetic low voltage, and tungsten‑halogen loads as well as electronic ballasts and 1/2 HP motors. Its design matches the entire line of Horizon dimmers, switches, and keypads, making it a great addition to new or retrofit installations.

        NOTE: Faceplates are not included. Refer to the HZ‑FP‑G series faceplates for more information.

        Integrated Keypad
        Supporting up to five buttons, the HZ‑SWEX is configurable for a variety of applications. Because the switch is attached to the Crestron® network, it can function as a keypad to trigger remote actions.

        Multiway Control
        The HZ‑SWEX supports load control from multiple locations. Up to four HZ‑KPEX or HZ‑AUX devices1 can be connected to a traveler wire in a traditional three- or four-way circuit to switch the load attached to the HZ‑SWEX. The HZ‑KPEX provides backlit, engravable button caps for multiway control, while the HZ-AUX provides a single large rocker button.

        Multigang Expansion
        Up to four devices may be installed side‑by‑side in a multigang electrical box with a compatible Horizon faceplate (HZ‑FP‑G series).1 All buttons in a multigang arrangement align to form one continuous control surface.

        infiNET EX Communications
        infiNET EX wireless technology provides two‑way RF communications throughout a residential or commercial structure without the need for physical control wiring. Each infiNET EX device acts as an expander by sending command signals to other infiNET EX devices in range (approximately 150 ft (46 m) indoors) to ensure reliability and stability.2

        The HZ‑SWEX communicates with a control system via a CEN‑GWEXER1 or newer infiNET EX Wireless Gateway. Up to 100 infiNET EX devices may coexist on a wireless network.

        Field-Replaceable Button Caps
        The preinstalled rocker button cap on the HZ‑SWEX is field replaceable, allowing for engravable multi‑button configurations.

        Multicolor Backlit Button Engraving
        Horizon button caps are laser engravable to identify each button's function. RGB LED backlights illuminate the engraved labels and can be adjusted for custom color backlighting. A built‑in ambient light sensor enables auto‑dimming of the backlight brightness according to day and night mode presets.

        Each button's backlight provides feedback by changing color, intensity, or both. The backlight can also flash to show that an action is being performed.

        Customizable Faceplates
        Horizon device faceplates (sold separately) are customizable for any décor. Color‑matched top and bottom trim pieces may be swapped easily after installation with custom trim fabricated from solid materials such as wood, metal, marble, engineered stone, or Corian® solid surface. Contact a Crestron representative, or refer to Crestron True Blue Support Online Help Answer ID: 1000140, to obtain specifications and CADs for the fabrication of custom trim. Paintable trim is also available separately.

        Note: The faceplate trim is attached magnetically, which may inhibit use in locations where tampering may occur.

         
        Key Features
        • Supports multiway controllers (HZ‑AUX, HZ‑KPEX)
        • Single‑gang U.S. wall box installation
        • Requires neutral wire connection
        • Gangable up to four across using Crestron® Horizon™ device compatible multi‑gang faceplates (HZ‑FP‑G series, sold separately)
        • Robust infiNET EX® wireless communication
        • Preinstalled large rocker button
        • Configurable with up to five field‑replaceable buttons
        • Custom backlit laser‑etched engravable buttons
        • Multicolor RGB LED backlighting
        • Auto‑dimming day/night backlight modes
        • Local button for load control without programming
        • Fully programmable via a Crestron control system
        • Crestron Home™ OS 3 compatible
        1. Item(s) sold separately.
        2. Any infiNET EX device that provides expander functionality will effectively extend the range of the wireless network beyond the initial range of the gateway. Battery‑powered infiNET EX devices do not provide expander functionality. A dedicated infiNET EX Wireless Expander, model CLW‑EXPEX, is also available.

        This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855‑263‑8754.

        This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

        The specific patents that cover Crestron products are listed online at patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, Crestron Home, Horizon, and infiNET EX are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Corian is either a trademark or registered trademark of DuPont de Nemours, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2020 Crestron Electronics, Inc.

         
        Load Requirements
        Load Type Incandescent, Magnetic Low Voltage, Tungsten-Halogen, Electronic Ballasts, 1/2 HP Motors
        Load Rating 10 A maximum;
        No minimum load
        Power Requirements
        120 VAC, 50/60 Hz;
        Requires neutral wire connection
        Controls
        Pushbutton

        (1) large rocker button preinstalled;
        Configurable with combinations of HZ‑BTN‑RKR1, HZ‑BTN‑RKR3, HZ‑BTN‑RKR5, or HZ‑BTN‑1 in blank or engraved models 1

        Setup

        (1) Hidden pushbutton;
        Located behind faceplate's top trim piece;
        Configures the LED backlight and calibrates the light sensor

        LED Indicator and Light Sensor
        Feedback (5) Color‑adjustable LEDs;
        Provides button backlighting
        Light Sensor Photosensor with adjustable sensitivity;
        Detects the ambient room light level to activate day or night mode

        NOTE: Light sensor performance may be affected by obstructions placed below the keypad.

        Wireless
        RF Transceiver infiNET EX® 2‑way RF, 2.4 GHz ISM Channels 11‑26 (2400 to 2483.5 MHz), default channel 15;
        IEEE 802.15.4 compliant
        Range (typical) 150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device(s);
        Subject to site-specific conditions and individual device capabilities 2
        Gateway Requires a CEN‑GWEXER or newer
        infiNET EX gateway 1
        Connections
        Load (1) 14‑12 AWG, screw terminal, red, load output
        Neutral (1) 14‑12 AWG, screw terminal, silver, neutral
        Remote (1) 14‑12 AWG, screw terminal, blue, remote
        Ground (1) 14‑12 AWG Class 1 flying lead, green, ground (wire nut included)
        Environmental
        Temperature 32° to 86° F (0° to 30° C)
        Humidity 10% to 90% RH (noncondensing)
        Enclosure
        Mounting Mounts in a 1‑gang U.S. electrical box or plaster ring (not included);
        3.5 in. (26 mm) electrical box depth recommended;
        Gangable up to four units
        Faceplate Requires an HZ‑FP‑G Horizon faceplate with mounting bracket (sold separately)
        Dimensions
        Height 4.13 in. (105 mm)
        Width 1.80 in. (46 mm)
        Depth 1.75 in. (45 mm) overall, extends 0.41 in.
        (11 mm) from wall surface when installed
        Weight
        6.7 oz (190 g)
        Compliance
        FCC, UL, IC
        1. Item(s) sold separately.
        2. Any infiNET EX device that provides expander functionality will effectively extend the range of the wireless network beyond the initial range of the gateway. Battery‑powered infiNET EX devices do not provide expander functionality. A dedicated infiNET EX Wireless Expander, model CLW‑EXPEX, is also available.

        This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855‑263‑8754.

        This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

        The specific patents that cover Crestron products are listed online at patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, Crestron Home, Horizon, and infiNET EX are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Corian is either a trademark or registered trademark of DuPont de Nemours, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2020 Crestron Electronics, Inc.

        Powered by Translations.com GlobalLink OneLink SoftwarePowered By OneLink