This page is only available in English

Produits

    Pages

        Take a look at #CrestronNow: Update on Lead Times - Learn More

        CLX-2DIM8

        8 Channel Dimmer Module, 2 Feeds, 120V

        Provides eight channels of dimming for 120 Volt residential lighting applications. Supports incandescent, magnetic low-voltage, neon/cold cathode, and 2-wire dimmable fluorescent lighting loads. Installs in a CAEN or CAEN-MLO wall mount automation enclosure as part of a complete Crestron® centralized lighting control system.

        For commercial lighting applications, please visit www.crestronlighting.com.
         

        Photo shows module with terminal block on left. CLT-2DIM8 terminal block sold separately.

         

        Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.

        The Crestron® CLX-2DIM8 is an eight-channel, two-feed dimmer module designed for 120V lighting system applications. It installs in a CAEN or CAEN-MLO enclosure and provides control of a variety of dimmable lighting load types including incandescent, magnetic low-voltage, neon/cold cathode, and 2-wire fluorescent. Dual feed capability provides two independent four-channel dimmers in one module space. Each output channel is rated for 1920 Watts (16 Amps), with a total module rating of 3840 Watts (32 Amps) when fed from two separate 20 Amp feeds.

        Forward Phase Dimming
        The CLX-2DIM8 employs forward phase (leading edge) dimming to handle inductive load types like magnetic low-voltage and neon, as well as incandescent and 2-wire fluorescent.

        Air-Gap Relays
        An air-gap relay on each channel output allows individual circuits to be serviced without disabling the entire module.

        Silent Operation
        Low-maintenance convection cooling with over-sized heatsinks affords silent operation with no mechanical components to wear out.

        Centralized Lighting Cabinet Installation
        Crestron CLX series lighting control modules are designed to be installed in a CAEN or CAEN-MLO wall mount enclosure. Available in a variety of sizes, CAEN and CAEN-MLO enclosures provide a scalable, high-density centralized lighting control solution for any-sized residence. A selection of CLX module types is offered to accommodate a wide range of load types and system configurations.

        Termination of high-voltage wiring to the CLX-2DIM8 module is facilitated using a CLT-2DIM8 terminal block, which is sold separately to enable termination of the wiring prior to installing the module. This terminal block mounts beside the module within the enclosure. Low-voltage control signals are bussed between each of the modules within an enclosure via a simple 5-wire link (interconnect jumpers included), which terminates to a single terminal block (model CAEN-BLOCK, sold separately) at the bottom of the enclosure.

        Cresnet® Communications
        The CLX-2DIM8 interfaces with a Crestron control system (a.k.a., control processor or automation processor) via Cresnet. Cresnet is a simple 4-wire network bus that provides the communications backbone for a system of Crestron lighting dimmers, switches, keypads, shades, thermostats, and other devices.

        Emergency Lighting Control
        The CLX-2DIM8 is UL® 924 and CSA® C22.2 No. 141-15 listed for use in controlling emergency lighting loads. In the event of a power failure, a contact closure from a power loss sensor (Crestron GLS-PLS-120/277, sold separately) activates the override mode in the CLX-2DIM8 to turn on each designated lighting load if it is off (assuming line power is supplied by a backup power source). The override dimming level can be preset to any value when commissioning the lighting system, so even if the load is already on prior to a power failure, it will change to the preset level when override mode is activated.

         
        Key Features
        • Eight-channel dimmer module for residential lighting applications
        • Installs in a Crestron® CAEN or CAEN-MLO enclosure
        • Supports dimmable incandescent, magnetic low-voltage, neon/cold cathode, and 2-wire fluorescent lighting loads
        • Single or dual feeds — two four-channel dimmers in one module
        • Rated 16 Amps per channel, 32 Amps total (using two 20 Amp feeds), at 120 Volts AC
        • Forward phase dimming
        • Customizable dimming curves via software
        • Built-in air gap relay per channel
        • Convection cooled for silent operation
        • Closure-activated override mode
        • UL® 924 and CSA® C22.2 No. 141-15 listed for emergency lighting control
        • Crestron system integration via Cresnet®
        • Easy termination using a CLT-2DIM8 terminal block (sold separately)
        • CEC Title 24 2013 compliant
        1. When connecting to a third-party arc fault breaker, the total load should not exceed 1,000 Watts per feed.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.

        Crestron, the Crestron logo, and Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. CSA is either a trademark or registered trademark of Canadian Standards Association in the United States and/or other countries. UL is either a trademark or registered trademark of UL LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.

         
        CrestronHome
        Load Control
          Dimmer Channels 8
          Dimmable Load Types Incandescent, magnetic low voltage, neon/cold cathode, 2-wire fluorescent
          Per Channel Load Rating 16 Amps (1920 Watts)
          Per Group Load Rating Group 1 (Channels 1-4): 16 Amps; (1920 Watts)
        Group 2 (Channels 5-8): 16 Amps (1920 Watts)
          Module Total Load Rating 32 Amps (3840 Watts) [1]
          Minimum Load 25 Watts
          Line/Load Voltage 120 Volts AC, 60 Hz; requires one or two single-phase feeds (may be same phase or split phases)
        Connections
          Via Terminal Block (sold separately) LINE 1 – 2: (2) Screw terminals, black, line power feed inputs (per group);
        DIM 1 – 8: (8) Screw terminals, red, load outputs (per channel);
        N IN 1 – 2: (2) Screw terminals, white, line power feed neutrals (per group);
        N OUT 1 – 8: (8) Screw terminals, white, load neutrals (per channel);
        Note: Each terminal accepts one 14-10 AWG wire.
          Module Interconnect (2) 5-pin 0.156 inch headers;
        Cresnet/Override interconnect ports;
        Each connects to the adjacent module using the interconnect jumper provided;
        Connects to a CAEN-BLOCK (sold separately) when installed in the lowest position within the enclosure
        Controls & Indicators
          PWR (1) Green LED, indicates line power is applied to the LINE 1 terminal
          NET (1) Yellow LED, indicates Cresnet communication with the control system
          SETUP (1) Pushbutton and (1) red LED, used to enter Local mode and test each channel
          1 – 8 (8) Red LEDs, each indicates the status of the corresponding channel
        Environmental
          Temperature 32° to 104° F (0° to 40° C)
          Humidity 10% to 90% RH (non-condensing)
          Heat Dissipation 26 BTU/hr + (4.7 BTU/hr x Load Current in Amps);
        176 BTU/hr at maximum load
        Enclosure
          Gray metal with black heat sink, surface mount module with (2) integral mounting flanges;
        Occupies 1 module space in a CAEN or CAEN-MLO enclosure
        Dimensions
          Height 7.59 in (193 mm)
          Width 6.92 in (176 mm)
          Depth 3.43 in (87 mm)
        Weight
          4.50 lb (2.04 kg)
        Compliance
          UL Listed for US & Canada, IC, UL 508, UL 924, CSA C22.2 No. 14, CSA C22.2 No. 141-15, CEC Title 24 2013, FCC Part 15 Class A digital device
        Click here to search product certificates.
        1. When connecting to a third-party arc fault breaker, the total load should not exceed 1,000 Watts per feed.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.

        Crestron, the Crestron logo, and Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. CSA is either a trademark or registered trademark of Canadian Standards Association in the United States and/or other countries. UL is either a trademark or registered trademark of UL LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.

        Pricing Region Select
        Please select your region below to see the appropriate Advertised Pricing.
        Powered by Translations.com GlobalLink OneLink SoftwarePowered By OneLink